Quick Summary
TECBEARS PETG Filament 1.75mm Olive Green 1kg is 3D printer filament for FDM printing. It is presented as a PETG spool with a stated diameter tolerance of +/-0.02mm, and the description also highlights strong layer adhesion and good toughness.
The olive green colour and 1kg spool size make it a straightforward filament choice for buyers checking colour, quantity and printer compatibility before ordering.
Who It Is Best For
This filament suits buyers who need PETG for an FDM 3D printer or 3D printing pen and want to check the colour, spool size and diameter before choosing a reel. It is also relevant if you want a filament described as having good layer adhesion and toughness.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | TECBEARS, which identifies the product clearly. |
| Material | PETG filament, so the buyer is selecting a PETG printing material. |
| Diameter | 1.75mm, which must match the printer or pen requirement. |
| Colour | Olive Green, which matters for the finished print appearance. |
| Quantity | 1kg spool, so the buyer knows the stated reel size. |
| Dimensional accuracy | +/-0.02mm, a useful check for buyers who want a stated tolerance. |
| Compatibility | Fits most FDM 3D printers, and is also described as suitable for 3D printer pens. |
Why Buyers Choose It
- The stated 1.75mm diameter helps buyers confirm printer compatibility before ordering.
- The 1kg spool size gives a clear check on how much filament is included.
- The +/-0.02mm tolerance is a useful specification for buyers comparing filament consistency.
- The olive green colour matters if the printed finish needs a specific appearance.
How It Works
- Load the filament into a compatible FDM 3D printer or 3D printing pen.
- Use the stated print guidance where relevant: nozzle temperature 230-260°C and bed temperature 60-70°C.
- For first-layer adhesion, the description recommends turning off the cooling fan from the first to the third layer.
- If needed, dry the container at 55°C for 8 hours and keep humidity below 20% RH in a sealed container with desiccant.
Real World Use
The filament is described as having good toughness and easy printing characteristics, with minimal warping and shrinkage compared with PLA. It is also described as having enhanced light transmission, which may matter for projects where light diffusion is part of the intended finish.
What To Know Before You Buy
Check that your printer or pen accepts 1.75mm filament before ordering. Confirm that olive green is the colour you want for the finished print, and remember that the spool is 1kg. If you plan to use the stated print guidance, review your machine settings before starting a job.
Common Buyer Questions
Will this work with my printer?
It is described as compatible with most FDM 3D printers and 3D printer pens, but you should still confirm that your machine uses 1.75mm filament.
What colour is it?
Olive Green.
How much filament is included?
1kg spool.
What print settings are suggested?
The description recommends 230-260°C nozzle temperature, 60-70°C bed temperature, and turning off the cooling fan from the first to the third layer for better first-layer adhesion.
Final Buying View
If you need PETG filament in Olive Green and want a 1.75mm, 1kg spool, this version gives the key buying details upfront. Confirm printer compatibility and chosen colour before ordering.
