Quick Summary
TECBEARS Rapid Matte PETG Filament is a 1.75mm black 3D printer filament supplied on a 1KG spool. It is described as a matte PETG option for FDM printers, with support for fast printing at 50 to 600mm/s and dimensional accuracy of +/- 0.02 mm.
The matte finish is intended to reduce the visible layer pattern after printing, while the listed recommended settings give a starting point for nozzle temperature, bed temperature and print speed.
Who It Is Best For
This filament suits buyers looking for a black PETG filament for 3D printing with a matte surface finish. It is also relevant if you want a 1.75mm spool for a most FDM printers setup and prefer to check print settings before use.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | TECBEARS. |
| Product type | Rapid matte PETG filament for 3D printing. |
| Filament diameter | 1.75mm, so it needs a printer set up for that size. |
| Colour | Black. |
| Spool size | 1KG spool, also stated as 2.2 lbs. |
| Speed range | 50 to 600mm/s, giving a wide stated print-speed range. |
| Dimensional accuracy | +/- 0.02 mm, which is relevant for consistency checks. |
| Recommended nozzle temperature | 230 to 270°C. |
| Recommended bed temperature | 70 to 80°C. |
Why Buyers Choose It
- The matte surface is described as helping to hide layer patterns after printing.
- The stated 1.75mm diameter helps buyers match the filament to a compatible printer setup.
- The wide 50 to 600mm/s speed range gives a clear print-setting reference point.
- The listed +/- 0.02 mm dimensional accuracy is a useful check for buyers focused on print consistency.
What To Know Before You Buy
Check that your printer uses 1.75mm filament before ordering. The listed print settings of 230 to 270°C for the nozzle and 70 to 80°C for the bed are useful starting points, but you should still test settings for your own printer and project. The spool is supplied as black PETG in a 1KG format.
Pros: The matte finish and stated dimensional accuracy give buyers clear specification points for print appearance and consistency.
Cons: The exact printer settings may need adjusting for different machines and print jobs.
Common Buyer Questions
Will this work with my printer?
It is a 1.75mm filament, so you should check that your printer is set up for that filament size and compatible with PETG use.
What print settings are listed?
The stated starting points are 230 to 270°C for the nozzle, 70 to 80°C for the bed, and 50 to 600mm/s for speed.
What finish does it aim to give?
It is described as a matte PETG filament with an ultra-smooth matte texture that helps hide the layer pattern.
Final Buying View
If you need black 1.75mm PETG filament with a matte finish and clear starting settings, this TECBEARS spool gives a straightforward specification to compare against your printer. Check filament size and your preferred print settings before ordering.
