Quick Summary
The UniTak3D Ender 3 Direct Drive Upgrade Conversion Bracket is made for Ender 3 V2, Ender 3 Pro, Ender 3 and Voxelab Aquila 3D printers. It is intended for B-MG, Dual Gear and Bowden extruder setups, and the extruder and hotend are not included.
It is positioned as a direct drive upgrade that removes the need for a Bowden PTFE tube and is described as giving precise retraction and better print results.
Who It Is Best For
This bracket is for buyers updating a supported Ender 3 series printer or Voxelab Aquila to direct drive, while keeping compatibility checks in mind. It is especially relevant if you are working with the listed extruder types and want a conversion bracket rather than a complete extruder or hotend kit.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Product type | Direct drive upgrade conversion bracket for 3D printers. |
| Compatible printers | Ender 3 V2, Ender 3 Pro, Ender 3 and Voxelab Aquila are listed as suitable models. |
| Not compatible | Ender 3 Max, Ender 3 Neo, Ender 3 V2 Neo and TITAN extruder are stated as not compatible. |
| Supported extruder types | B-MG, Dual Gear and Bowden extruder setups are named in the title. |
| Included parts | Extruder and hotend are not included. |
| Installation note | No X, Y or Z-axis build volume lost, and no firmware or wiring modification is stated. |
Why Buyers Choose It
- Removing the Bowden PTFE tube is stated to improve extrusion and retraction.
- The bracket is described as having aligned split-type mounting holes and supports on both sides for a more stable centre position.
- It is stated to support TPU and other flexible materials better than Bowden extrusion.
- No firmware or wiring modification is stated, which may reduce the amount of printer setup involved.
How It Works
- Remove the original Ender 3 series plate.
- Mount the direct drive upgrade kit in its place.
- Use it with a supported printer and compatible extruder setup.
- Fit your own extruder and hotend separately, as they are not included.
Real World Use
The bracket is meant for fitting to supported Ender 3 series printers and the Voxelab Aquila when converting to direct drive. It is a conversion part rather than a complete extruder solution, so buyers should check the printer model and the extruder type before ordering.
What To Know Before You Buy
Confirm that your printer is one of the listed models and that it is not an Ender 3 Max, Ender 3 Neo or Ender 3 V2 Neo. Check that your extruder setup matches the named B-MG, Dual Gear or Bowden compatibility, and remember that the extruder and hotend are not included.
If you are planning a direct drive conversion, this bracket is intended to keep the build volume unchanged and avoid firmware or wiring modification.
Common Buyer Questions
Which printers does it fit?
It is listed for Ender 3 V2, Ender 3 Pro, Ender 3 and Voxelab Aquila printers.
Does it include an extruder or hotend?
No, both the extruder and hotend are not included.
Can it be used with Ender 3 Neo models?
No, Ender 3 Neo and Ender 3 V2 Neo are stated as not compatible.
Does installation require firmware or wiring changes?
No firmware or wiring modification is stated.
Final Buying View
This conversion bracket suits buyers who want to convert a supported Ender 3 series printer or Voxelab Aquila to direct drive using their own extruder and hotend. Check the exact printer model and extruder type carefully before ordering.
