Quick Summary
The D-TECH Pre-Wired LED Rear Trailer Lights Kit is a 13 pin trailer light kit with a 5.5 m cable and an extra 25 cm lead. It is described as a 7-function rear lighting kit for trailer boards, caravans and bike carriers, with 12V/24V operation and IP65 protection.
The kit is presented as plug and play, with double outlets and pre-wired cable to reduce the amount of wiring needed on the trailer side. The stated light functions are turn signal, brake light, trailer position light, rear fog light, reversing light, number plate light and reflector.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | D-TECH |
| Product type | Pre-wired LED rear trailer lights kit |
| Connection | 13 pin plug and play format for trailer lighting setups |
| Cable length | 5.5 m plus an extra 25 cm lead for routing and connection on the trailer |
| Electrical rating | 12V / 24V |
| Protection rating | IP65 |
| Stated functions | Turn signal, brake light, trailer position light, rear fog light, reversing light, number plate light and reflector |
| Dimensions | 223 x 100 x 48 mm |
What to Compare Before Buying
- Plug type: This kit uses a 13 pin connection, so check that your towing setup uses the same format.
- Cable length: The lead is 5.5 m with an extra 25 cm section, so compare that with the distance needed on your trailer or carrier.
- Voltage: The stated 12V / 24V rating should match the vehicle or towing system it will be used with.
- Function set: The kit covers seven light functions, so make sure those are the functions you need.
- Size: The listed dimensions are 223 x 100 x 48 mm, which matter if you are replacing an existing light unit or planning the mounting space.
Compatibility, Size and Fit
This kit is aimed at trailer, caravan and bike carrier lighting setups that use a 13 pin connection. The stated dimensions are 223 x 100 x 48 mm, so it is worth checking the available mounting space before buying.
If your setup uses a different connector type, a different voltage arrangement, or a different lighting layout, this version is unlikely to be the right choice.
What Else You May Need
The description says the lights are not included with the cable kit, so check whether your installation needs separate light units, fixing hardware or other trailer-specific parts.
Before You Decide
Confirm the 13 pin connection, the 12V / 24V rating and the 223 x 100 x 48 mm size before choosing an offer. Also check whether your setup needs only the wiring kit or the light units as well.
