Quick Summary
The sourcing map RC Boat Drive Shaft Assemble Kit is a drive shaft and coupler set for DIY RC models. It includes a 29.5 cm shaft, a 25 cm sleeve and a 3.17 mm universal joint diameter, with a 3.6 cm propeller diameter stated for the kit.
The kit is described as using 304 stainless steel and as including parts such as the bushing, shaft, washer, self-locking nut, propeller fork, propeller blade, connector, wrench, screw and streamlined head. Check the measurements and the motor shaft size carefully before choosing an offer.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Product type | RC boat drive shaft assemble kit for DIY model boats. |
| Shaft length | 29.5 cm – confirm this suits the layout of the model. |
| Sleeve length | 25 cm – check available space before buying. |
| Propeller diameter | 3.6 cm – compare with the intended model setup. |
| Universal joint diameter | 3.17 mm – match this to the motor shaft requirement. |
| Material | 304 stainless steel. |
| Included parts | Bushing, shaft, washer, self-locking nut, propeller fork, propeller blade, connector, wrench, screw and streamlined head. |
What to Compare Before Buying
- Motor shaft size: The stated universal joint diameter is 3.17 mm, so this is the main fit check for the drive connection.
- Length and spacing: Compare the 29.5 cm shaft and 25 cm sleeve with the space available in your model.
- Propeller size: The kit uses a 3.6 cm propeller diameter, so make sure it matches your intended setup.
- Included parts: Confirm the set contents match what you need for assembly.
What Else You May Need
This kit is for assembly, so make sure you have the correct RC boat model and the matching motor shaft size before fitting it.
Before You Decide
Check the 3.17 mm motor shaft fit, the 29.5 cm shaft length, the 25 cm sleeve length and the listed kit contents before choosing an offer. Follow the fitting instructions for your specific model during installation.
