Quick Summary
This is a 11.1V 2000mAh 30C 3S LiPo rechargeable battery with a Deans-T discharge connector and JST XH-4P charging connector. It is presented for airsoft rifles and other models where the voltage, size and plug type match.
The stated capacity, connector type and 30C discharge rating are the main checks before choosing it. For airsoft use, confirm the battery bay space and connector fit against your exact setup.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Battery type | Rechargeable LiPo battery. Check that your charger supports LiPo batteries and balance charging. |
| Voltage | 11.1V. Match this to the equipment specification before use. |
| Capacity | 2000mAh. Compare this with the amount of run time or reserve capacity you want. |
| Discharge rating | 30C. This is a key figure for buyers comparing output demand and battery choice. |
| Discharge connector | Deans-T. Confirm the connector type on your device or use a suitable adaptor if required. |
| Charging connector | JST XH-4P. Check charger compatibility before ordering. |
| Cell count | 3S. Match this to the expected battery configuration for the equipment. |
What to Compare Before Buying
- Voltage: This battery is rated at 11.1V, so it needs equipment that matches that voltage.
- Connector type: The discharge connector is Deans-T, so the plug on your airsoft replica or fitting must match.
- Battery size and bay space: Check the battery compartment dimensions in your replica before choosing it.
- Charging method: The charging connector is JST XH-4P, so the charger connection must suit that format.
- Discharge rating: The stated 30C rating is a useful comparison point when choosing between battery options.
Compatibility, Size and Fit
The battery is described for airsoft models including M4, M110, AK47, L85, MP5, SCAR, M249, AUG, M60, RPK and PKM types, along with some other listed models. It should only be chosen when the voltage, size and plug type match your exact replica or equipment.
If the battery compartment is tight, the physical size becomes just as important as the connector type and voltage. Check the fit carefully before deciding.
Safe Use and Important Precautions
The battery carries CE and RoHS references and is described with overheating, overcharge, overload and short-circuit protection. It is also stated that LiPo batteries should be charged with a LiPo balance charger.
Follow the manufacturer’s instructions for charging and use, and do not assume compatibility from the connector alone.
Before You Decide
Confirm the 11.1V rating, 3S format, Deans-T connector and JST XH-4P charging connection against your equipment and charger. Make sure the battery bay has enough space for the chosen pack before selecting an offer.
