Quick Summary
The NUPROL Power 11.1V 3000mAh 3S Mini Tamiya Stick Battery is a Li-Ion airsoft battery in a stick-style format. It is described as a standard design for fitment in the stock buffer tube of rear wired airsoft replicas, with a Mini Tamiya connector.
The stated figures include 11.1V, 3000mAh and 10C/15C at 30A/45A continuous and burst. Check the battery compartment space, connector type and your replica’s minimum discharge requirement before choosing an offer.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | NUPROL Power, which identifies the battery range. |
| Product type | Li-Ion airsoft battery in a stick configuration. |
| Voltage | 11.1V, so the battery platform needs to match the replica’s requirements. |
| Capacity | 3000mAh, a key figure for battery selection. |
| Discharge rating | 10C/15C at 30A/45A continuous and burst, which should be checked against the replica’s minimum requirement. |
| Connector | Mini Tamiya connector, so the replica must use the same connector type. |
| Configuration | Stick-style battery design for stock buffer tube fitment on rear wired airsoft replicas. |
What to Compare Before Buying
- Voltage: This model is 11.1V. Compare that with the voltage your replica is intended to use.
- Connector type: It uses a Mini Tamiya connector, so the connector on your replica needs to match.
- Battery space: The stick format is meant for tight spaces and buffer tube fitment, so compare the battery dimensions with the compartment before buying.
- Discharge requirement: The stated 10C/15C rating means the replica should meet the minimum discharge requirement for the battery you choose.
- Charging setup: This battery is intended for use with a Li-Ion balance charger.
What Else You May Need
A Li-Ion balance charger is required for charging. For correct fit and use, the replica should also have a Mini Tamiya connector and enough battery space for the stick-style pack.
Before You Decide
Confirm the 11.1V rating, Mini Tamiya connector and stick format against your replica before choosing. If you need a different connector, voltage or battery shape, a different version will be the better match. Follow the manufacturer instructions for charging and use.
Using It in Practice
For rear wired airsoft replicas with a stock buffer tube, the stick format is aimed at compact installation. The practical checks are the same ones that matter at purchase time: connector match, available space and the battery’s stated discharge requirement.
