Quick Summary
The ToopMount Scope Mount Rings Dual Ring Base Adjustable Adapter Mount is a scope mount for 20mm Picatinny rail use, with support for 25.4mm and 30mm tube diameters. It is described as a high profile mount with an offset cantilever design and an adjustable ring position, giving you several setup options for fitting and alignment.
Who It Is Best For
This mount suits buyers who need a dual ring scope mount for a 20mm Picatinny rail and want the option to use either 25.4mm or 30mm tube sizes. It is a practical choice for anyone looking for a mount that can be adjusted to different positions and fitted with ring reducers where needed.
What To Know Before You Buy
The mount is described with a high profile height of about 23 to 25mm and a double nut design with 4 screws for each ring cap. It is also listed as having a built in movable thread stop pin and thumbscrews for installation and removal.
Pros: Adjustable ring positions and support for both 25.4mm and 30mm tube diameters make it flexible for the right setup.
Cons: You should check your tube diameter and rail type before ordering, as the fit depends on the correct variation being used.
Common Buyer Questions
What tube sizes does it fit?
It is listed for 30mm and 25.4mm tube diameters, with ring reducers included for the smaller size.
What rail does it fit?
It is made for a 20mm Picatinny rail.
Can the ring position be adjusted?
Yes, it is described as adjustable with five possible positions, from standard through to hyper extended.
How is it secured?
It uses a double nut design with 4 screws for each ring cap.
Is it easy to fit and remove?
It is described as using thumbscrews for quick installation and removal.
Key Details
| Detail | What it means in use |
|---|---|
| Brand | ToopMount |
| Product type | Scope mount rings with dual ring base |
| Tube diameter | 25.4mm and 30mm |
| Rail width | 20mm Picatinny rail |
| Profile | High profile mount, about 23 to 25mm from ring bottom to claw top |
| Adjustment positions | Standard, extended, intermediate extended, super extended and hyper extended |
| Ring cap screws | 4 screws for each ring cap |
| Weight | 200g |
Final Buying View
If you need an adjustable scope mount for a 20mm Picatinny rail and want support for both 25.4mm and 30mm tube sizes, this ToopMount option gives you a flexible and practical setup. The adjustable ring positions and secure screw arrangement add useful fitting choice. Check your tube diameter and rail type before ordering, then choose the variation that matches your setup.
