Quick Summary
The JD Brands Propane Gas Regulator is a 37 mbar screw-on POL regulator supplied with a 2 m hose and 2 clips. It is intended for propane gas use and is described as fitting Calor and Flogas bottles with POL screw fittings.
The stated flow rate is 1.5 kg/h. If you are choosing between offers, check the fitting type, hose length and exact bottle compatibility before buying.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | JD Brands – useful for matching the exact product. |
| Product type | Propane gas regulator – a core safety and compatibility item for the gas connection. |
| Pressure | 37 mbar – compare this with the requirement for your appliance. |
| Flow rate | 1.5 kg/h – important when checking whether the regulator matches the intended gas setup. |
| Fitting | Standard screw-on POL – confirm the cylinder connection before choosing an offer. |
| Hose length | 2 m – helps judge positioning between the cylinder and appliance. |
| Clips included | 2 hose clips – useful for confirming the connection parts included. |
| Stated bottle compatibility | Calor and Flogas propane bottles with POL screw fittings. |
What to Compare Before Buying
- Connection type: This model uses a screw-on POL fitting, so check that your cylinder uses the same connection.
- Pressure: The regulator is rated at 37 mbar, so compare that figure with your appliance requirement.
- Flow rate: The stated 1.5 kg/h flow rate is a key check for the gas setup you plan to use.
- Hose length: The 2 m hose affects where the cylinder can sit relative to the appliance.
- Included clips: Two hose clips are included, so confirm whether any other fittings are needed for your setup.
What Else You May Need
You will need a compatible propane cylinder and an appliance that matches the regulator’s pressure and connection type.
Before You Decide
Confirm the POL screw-on fitting, the 37 mbar rating and the 2 m hose length before choosing an offer. Check that your cylinder and appliance match the same connection and pressure requirements, and follow the manufacturer’s instructions for installation and use.
