Quick Summary
This PCP air compressor has a built-in power converter and supports 12V DC and 110V AC input. It is described as portable, water-free and oil-free, and the stated maximum inflation pressure is 30 MPa / 4500 psi.
The compressor is intended for PCP air devices and paintball use, and the description also mentions PCP rifle, pistol and scuba bottle use. Before choosing it, check the power supply you plan to use, the hose connection and the pressure requirement for your equipment.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Product type | PCP air compressor for inflating compatible air devices. |
| Power input | 12V DC and 110V AC support, with a built-in power converter. |
| Maximum pressure | 30 MPa / 4500 psi, so the pressure requirement of the item being filled must match the compressor’s stated limit. |
| Power rating | 250 W. |
| Connection | 8 mm quick disconnect fittings are stated at both ends of the hose. |
| Cooling and maintenance | Described as water-free and oil-free, with an integrated oil-moisture filter. |
| Operating guidance | The description states a continuous inflation period of 25 minutes followed by a 10 minute rest. |
What to Compare Before Buying
- Power supply: This model works with 12V DC or 110V AC. Confirm that the intended power source matches the compressor’s input requirements.
- Pressure requirement: The stated maximum is 30 MPa / 4500 psi. Check the pressure needed for the item you plan to fill.
- Connection type: The hose uses 8 mm quick disconnect fittings. Make sure your equipment has a matching connector.
- Fill capacity: The description recommends an air cylinder volume of up to 1 L / 60 ci. Compare that with the size of the item you want to inflate.
- Duty cycle: The stated cycle is 25 minutes of inflation followed by 10 minutes of rest. Allow for that when planning longer filling sessions.
How It Works
The compressor can be powered from 12V DC or 110V AC and uses its built-in converter to support either input. The hose connection uses 8 mm quick disconnect fittings, and the built-in temperature display is intended to show internal temperature while filling. The description says to stop filling at 80 degrees and let the unit cool before restarting.
Before You Decide
Check that the power source, connector type and pressure requirement match your equipment. Confirm whether you need the 12V DC or 110V AC setup, and make sure the item you plan to fill stays within the stated 1 L / 60 ci guidance and duty cycle. Follow the manufacturer’s instructions for the exact setup and use.
