Quick Summary
This is a 3-piece PCP diving cylinder fill hose fitting set with an 8 mm female quick disconnect connector and male threads for high-pressure filling connections. The listed thread options include 1/8 NPT, 1/8 BSPP and M10x1, with 1/8 BSPP also named in the item text.
The set is described as copper, with a stated length of 26.5 mm and a pressure rating of 3000-5000 psi. It is supplied with a sealing ring washer.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Pack quantity | 3 pieces, so check whether you need a single fitting or a matching set. |
| Connector type | 8 mm female quick disconnect connector for high-pressure fill connections. |
| Thread options named | 1/8 NPT, 1/8 BSPP and M10x1 are all named, so the thread standard must match the equipment being connected. |
| Length | 26.5 mm, which is the stated size for planning a connection or replacement. |
| Pressure rating | 3000-5000 psi, so the fitting is specified for high-pressure use. |
| Included item | Sealing ring washer supplied. |
What to Compare Before Buying
- Thread standard: Match the fitting to 1/8 NPT, 1/8 BSPP or M10x1 only where the connection point uses the same thread.
- Connector style: Check that an 8 mm female quick disconnect fits the hose or adapter you already have.
- Pack quantity: This set contains 3 pieces, so compare that with how many connections you need to make.
- Pressure requirement: The stated 3000-5000 psi rating should suit the system you plan to connect.
- Included washer: Confirm whether you need a sealing ring washer in the fitment you are replacing.
What Else You May Need
A compatible high-pressure hose, tank or fill setup with the matching thread and connector type is needed for use. Check the exact connection standard before ordering.
Before You Decide
Confirm the thread standard, the 8 mm quick disconnect connection and the 3-piece pack quantity before choosing. The pressure rating and included sealing ring washer are also important if you are replacing an existing fill fitting or building a matching setup.
