Quick Summary
The DRYHTEN DIN Valve Filling Station Adapter is a filling station adapter with a 50 cm hose and dual gauge layout. It is stated for up to 4500 psi / 300 bar and uses a 5/8-18UNF connection alongside M18x1.5 compatibility on the input side. The output adapter is described as a standard 8 mm female quick disconnect.
This setup also includes a spare O-ring and gaskets. For buyers, the most important checks are the thread connection, the output connection, the pressure rating and whether the hose length suits the filling setup.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Product type | DIN valve filling station adapter for charging setups. |
| Maximum pressure | 4500 psi / 300 bar. This is a key limit to compare with the intended filling setup. |
| Input thread | M18x1.5 or 5/8-18UNF. |
| Output adapter | Standard 8 mm female quick disconnect. |
| Hose length | 50 cm hose. This affects how far the connection can be positioned from the cylinder. |
| Gauge layout | Dual gauge design, with one gauge for cylinder pressure and one for output pressure. |
| Included items | Spare O-ring and gaskets. |
What to Compare Before Buying
- Connection type: Check the input thread and output connector against the equipment you plan to use with it.
- Pressure rating: The stated limit is 4500 psi / 300 bar, so compare that with the pressure requirements of your setup.
- Hose length: The 50 cm hose changes how much space you have around the cylinder and fill point.
- Gauge arrangement: Two gauges are included, so you can compare whether that layout suits the way you want to monitor pressure.
- Included seals: Spare O-ring and gaskets are supplied, which matters if you want the complete sealing parts in the pack.
What Is Included
- DRYHTEN DIN valve filling station adapter
- 50 cm high-pressure hose
- Dual gauge setup
- Spare O-ring
- Gaskets
Before You Decide
Confirm the input thread, output connector and 50 cm hose length match your filling setup before choosing an offer. Check the 4500 psi / 300 bar rating against the pressure you need, and make sure the included seals and gauges suit the way you plan to use the adapter.
