Quick Summary
The GYM MASTER GM3 is a weight lifting power rack squat cage with a stated height of 186 cm and depth of 60 cm. It is described as a fully adjustable rack with laser cut numbering, a pull up bar, safety bars and J-cups.
The product is also described with a 400 kg maximum load, a gunmetal powder coated finish and a note that the 186 cm version is intended for low ceilings. If the rack height, depth, load limit or included attachments matter to your setup, those are the key points to compare before choosing an offer.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | GYM MASTER, so the product can be identified as the GM3 model. |
| Product type | Weight lifting power rack squat cage for barbell training. |
| Height | 186 cm variant, which is relevant if ceiling space is limited. |
| Depth | 60 cm variant, important for floor space planning. |
| Maximum load | 400 kg maximum load. |
| Included items | Pull up bar, 2 x pin and pipe safety bars, and 2 x laser cut J-cups. |
| Bar compatibility | Suits 6ft International or 7ft bars. |
| Hole diameter | 16.5 mm holes, with attachments to suit a 15.5 mm pin diameter. |
| Finish | Gunmetal powder coated finish. |
| Commercial use | Not suitable for commercial use. |
What to Compare Before Buying
- Ceiling height: This version is 186 cm high, so check that your training space has enough room above the rack and bar path.
- Floor space: The stated depth is 60 cm, while the approximate maximum width is 133 cm and width between uprights is 110 cm.
- Load limit: The rack is stated at 400 kg max load, so compare that figure with the weight you plan to place on it.
- Bar and attachment fit: It suits 6ft International or 7ft bars and has 16.5 mm holes for attachments with a 15.5 mm pin diameter.
- Included parts: Check that the pull up bar, safety bars and J-cups match what you want from the setup.
Compatibility, Size and Fit
The GM3 is described as a 186 cm by 60 cm rack, with an approximate maximum height of 186 cm, maximum width of 133 cm and maximum depth of 81 cm. The width between uprights is stated as 110 cm.
It suits 6ft International or 7ft bars, and the hole diameter is 16.5 mm with attachments to suit a 15.5 mm pin diameter. That makes exact bar and attachment checking important before purchase.
When to Consider a Different Option
A different rack should be considered if you need a commercial-use product, a taller structure, or a layout that needs more room than the stated dimensions allow. Buyers who want a less restricted pull up bar position may also want to compare other heights, since this 186 cm model is noted as less functional for taller users on the pull up bar.
Before You Decide
Confirm the 186 cm height, 60 cm depth and 400 kg maximum load against your space and training needs. Check that your bar length and attachment pin size match the stated fit, and make sure the selected rack is the version you want before choosing an offer.
