Quick Summary
The HMKUGO filling nipple quick disconnect kit is a stainless steel fittings set with a 1/8" BSPP female thread and an 8 mm male refill nipple. It is described as a male and female kit for paintball, HPA, CO2 converter and air tool fittings.
The stated pressure figures are 4000 PSI rated pressure and 5000 PSI maximum pressure. The description also states a temperature resistance of 1000℃ and notes that the male plug comes without a valve inside.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | HMKUGO. This identifies the product line. |
| Product type | Filling nipple quick disconnect kit. This is a fittings kit rather than a complete tool or device. |
| Thread | 1/8" BSPP female thread. Check this against the connector you plan to use. |
| Male connection | 8 mm male refill nipple. Check the exact connector size before buying. |
| Material | Stainless steel. This is the stated construction for the kit. |
| Pressure figures | 4000 PSI rated pressure and 5000 PSI maximum pressure are stated for this kit. |
| Temperature resistance | 1000℃ is stated. Compare this only with the intended working conditions and manufacturer instructions. |
| Valve note | The male plug comes without a valve inside. Check whether that suits the fitting arrangement you need. |
What to Compare Before Buying
- Thread type: This kit uses a 1/8" BSPP female thread. Compare that with the connector on your equipment.
- Male nipple size: The 8 mm male refill nipple must match the part it connects to.
- Pressure figures: The stated 4000 PSI rating and 5000 PSI maximum pressure are important if your setup has its own pressure limits.
- Valve arrangement: The male plug is stated to come without a valve inside, so check whether that configuration is right for your use.
What Else You May Need
You may need the matching filling adapter, hose or equipment connector for the setup you are building. Check that the full connection path uses the same thread and size before choosing an offer.
Before You Decide
Confirm the 1/8" BSPP female thread, the 8 mm male nipple and the no-valve male plug configuration before choosing an offer. If pressure and heat figures matter to your setup, check them against the exact equipment you plan to use.
