Quick Summary
The TUXING 0.22 L 4500Psi PCP air tank is a carbon fibre HPA cylinder with an M18 x 1.5 neck thread. It is described as a gas cylinder for PCP air rifle, paintball and hunting use, and the stated working pressure is 30 MPa / 300 bar / 4500 psi.
For buyers, the main checks are the capacity, the thread size, the pressure figures and the certification status. The cylinder is described as CE / EN approved, with a 3 year inspection cycle and a 15 year service life.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | TUXING. |
| Capacity | 0.22 L / 220 cc / 13 cu in. Compare this with the fill size you need. |
| Thread | M18 x 1.5-6H. Check the connection matches your equipment. |
| Working pressure | 30 MPa / 300 bar / 4500 psi. |
| Hydrostatic test pressure | 50 MPa. |
| Minimum burst pressure | 102 MPa. |
| Certification | CE / EN approved, not DOT. |
| Inspection cycle | 3 years. |
| Service life | 15 years. |
| Construction | AL6061 aluminium alloy liner with full-wrapped carbon fibre and glass fibre winding, with epoxy coated outer surface. |
What to Compare Before Buying
- Capacity: The stated 0.22 L size is very small, so compare it with the air volume you want to carry or fill.
- Thread: M18 x 1.5-6H must match the regulator, valve or fitting on your setup.
- Pressure: Compare the 30 MPa / 300 bar / 4500 psi working pressure with the pressure required for your equipment.
- Certification: The cylinder is CE / EN approved and not DOT, so the approval type matters if you are choosing between regions or standards.
- Inspection and service life: The stated 3 year inspection cycle and 15 year service life are important ownership checks.
What Else You May Need
Check whether your PCP air rifle, paintball setup or filling equipment is compatible with an M18 x 1.5 thread and the stated pressure rating. Any matching fittings or adapters need to suit the exact cylinder connection.
Before You Decide
Confirm the 0.22 L capacity, the M18 x 1.5-6H thread and the CE / EN approval before choosing an offer. For pressure-sensitive equipment, follow the relevant manufacturer instructions and match the cylinder to the exact setup you plan to use.
