Quick Summary
The TUXING PCP Air Tank is a 0.22 L composite cylinder with a 4500 psi working pressure. It is also described as a 13 cubic inch, 220 cc tank, so the capacity and pressure rating are the key details to check before choosing it.
This tank uses an AL6061 aluminium alloy liner with carbon fibre and glass fibre winding. It also has an M18x1.5-6H neck thread. For this type of product, those are the main fitting and specification points that matter most.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Capacity | 0.22 L, also described as 13 cubic inch / 220 cc. Capacity is the main size check for this cylinder. |
| Working pressure | 30 MPa / 300 bar / 4500 psi. Compare this with the pressure requirement for your setup. |
| Hydrostatic test pressure | 50 MPa. This is a stated test pressure for the cylinder. |
| Minimum burst pressure | 102 MPa. This is a stated pressure figure for the cylinder body. |
| Neck thread | M18x1.5-6H. Check thread compatibility before fitting. |
| Materials | Imported AL6061 aluminium alloy liner, carbon fibre and glass fibre winding. This gives the cylinder its composite construction. |
| Certification | CE Certificate. The product is also stated as not DOT approved. |
| Inspection cycle | 3 years. Buyers should note the stated inspection cycle. |
| Service life | 15 years. This is the stated service life. |
What to Compare Before Buying
- Capacity: Check whether 0.22 L, 13 cubic inch or 220 cc is the size you need for your setup.
- Pressure rating: The stated working pressure is 4500 psi, so compare that with your filling and operating requirements.
- Thread: The neck thread is M18x1.5-6H, so the matching connector or filling setup must suit that thread.
- Approval and region: It carries CE certification and is stated as not DOT approved, which matters if your intended use depends on a different approval.
- Inspection timing: The stated 3 year inspection cycle and 15 year service life affect long-term ownership planning.
Compatibility, Size and Fit
The main fit check is the M18x1.5-6H neck thread. Make sure the cylinder connection or filling arrangement is made for that thread type. Also check the stated capacity and pressure rating against the exact equipment you plan to use with it.
Before You Decide
Confirm the 0.22 L / 13 cubic inch / 220 cc capacity, the M18x1.5-6H neck thread and the 4500 psi working pressure before choosing an offer. Also check whether CE certification is the approval you need, since the cylinder is stated as not DOT approved.
